Gas Regulators & Control Equipment

Disposable Gas Cylinder Regulators

BossGas disposable gas bottle regulator to suit disposable gas bottles with a 4mm push on hose connector and available with or without a gauge.

Supplier Product Code: Without Guage – 600043
With Guage – 600044

Regulator LPG Comet EDGE 400kPa Side Inlet

The COMET 500 LP Gas regulator has been designed for use with the range of COMET blowpipe equipment, and can be used for most cutting, welding and heating applications.

Supplier Product Code: 301525

Regulator ARGON Comet EDGE 45Lpm Side Inlet

This regulator is designed for use with MIG and TIG welding processes.

Supplier Product Code: 301526

CutSkill Argon Gas Regulator

CutSkill & WeldSkill regulators offer excellent quality and performance for use with most light to medium applications. Regulator is failsafe against over pressure. Robust, failsafe and accurate pressure gauges. Colour coded for gas identification. Ideal for the Tradesman, Contractor & Handyman. Conforms to AS4267.

Supplier Product Code: 210254

CutSkill LPG Regulator

Specifically designed for the budget conscious buyer, CutSkill and WeldSkill regulators offer excellent quality and performance for use with most light to medium applications.

Supplier Product Code: 201003

CutSkill Oxygen Regulator

Specifically designed for the budget conscious buyer, CutSkill regulators offer excellent quality and performance for use with most light to medium applications. CutSkill regulators conform to AS4267 and are factory set to deliver the correct maximum pressure or flow.

Supplier Product Code: 210222

CutSkill Acetylene Regulator

Specifically designed for the budget conscious buyer, CutSkill regulators offer excellent quality and performance for use with most light to medium applications. CutSkill regulators conform to AS4267 and are factory set to deliver the correct maximum pressure or flow.

Supplier Product Code: 210223

Set Pressure Regulator With Flowmeter

The Tesuco set pressure regulator with flow meter is perfect for TIG welding as well as for general MIG welding applications with flow rates not exceeding 25 litres per minute.

Supplier Product Code:
Bottom – P/N RC1BARFM, Side – P/N RC1SARFM

Argon Regulator with Y-Piece and two 0-25Lpm Flowmeters

This regulator is perfect for either, welding and purging at the same time or for supplying two welders at the same time off one cylinder.

Supplier Product Code: RC1BAR2FM

Nitrogen Regulator – 0-1,000 kPa Outlet Pressure

This regulator is perfect for low pressure testing of equipment and pipelines as well as pumping up tyres on cars, trucks, motorcycles as well as a multitude of other applications.

Supplier Product Code: RC1SNI10

Nitrogen Regulator – 0-6,000 kPa Outlet Pressure

If you are in HVAC-R industries then this is the regulator for you, strong and robust with gauge protectors as standard this regulator is built for tough work. It comes standard with a ¼ SAE flare fitting on the outlet (Removable) making connection to hoses nice and simple. High outlet pressure (0-6,000 kPa) with plenty of flow makes this suitable for a multitude of uses.

Supplier Product Code: RI1SNI60

Beverage Regulator for Home Brew & Carbonated Water

The Tesuco beverage regulator is perfect for home brew or carbonated water and fully complies with AS 4267. It is designed for use with CO2, has two pressure gauges, a fully machined brass body with single stage pressure reduction and is side entry to suit refillable CO2 cylinder valve outlets.

Supplier Product Code: RC1SCD04

Regulator Micro CO2 for Home Brew Carbonated Water

• CO2  Regulator – 2 Gauge
• Food Grade M10x1 – 5/16 P/Fit
• In 13,000kPa Out 400kPa

Supplier Product Code: RIMCD4M10

8mm ID Twin Hoses
Oxygen/Acetylene and Oxygen/LPG

Made from premium quality material and fitted with LP137 & LP242 repairable hose fittings. Fully meets AS 1335 and a high maximum working pressure rating of 1.5 mpa

Supplier Product Code:
Oxygen/Acetylene x 5m – GWTW8OA5
Oxygen/Acetylene x 10m – GWTW8OA10
Oxygen/LPG x 5m – GWTW8OL5
Oxygen/LPG x 10m – GWTW8OL10

TRONICFLAME Straight Line Cutter with 1.8m Track

• Light and compact
• Simple operation
• Acetylene or LPG fuel gas
• Quick action gas valve
• Supplied with 3 Cutting tips

Supplier Product Code: TF12